PRODUCTS > DIAGNOSTIC EQUIPMENT > AUTO REF / KERATOMETERS > ARKM 200

ARKM 200

New Generation of Multi-Functional Instrument

A highly accurate machine by Takagi which facilitates short examination times combined with ease of use making the ARKM-200  essential for the professional. The advanced touch-screen display allows you to perform both refraction and keratometry with one simple movement. Capture one eye on the display and the ARKM-200 will display both eyes automatically. The ARKM-200 allows efficient examination of patients with its new features.
  • Various settings like changing modes can be done on the touch panel display.
  • The wide viewed fixation target assures natural fixation to avoid accommodation of a patient's eye.
  • The quick thermal printer has shortened the total measurement time.
Automatic Measurement
  1. Use power assisted joystick for rough alignment.
  2. Touch the center of the pupil on the display with your fingertip and ARKM-200 will automatically align and begin measurements.
  3. Press the R/L Icon on the display and the instrument will automatically adjust and measure the other eye.
  4. Printing is automatic.

Power Joystick
  • Move the joystick ring up/down and the instrument head moves up/down quickly.
  • Move the joystick hand rest to the right/left or backward/forward and the instrument head moves to the right/left or backward/forward quickly.
  • Rotate the joystick ring and the instrument head moves up/down slowly.
  • Tilt the joystick and the instrument head moves in each direction slowly.
Refractometry Normal Mode:
Fogging is applied automatically for each measurement for more accurate results.

Quick Mode:
Fogging is applied as needed for consecutive measurements.

IOL/CAT Mode:
The mode is used to measure cataract or pseudophakic eyes.


Keratometry
  • Short consecutive measurements and time provide reliable data.
  • Measurements at Ø6.0mm (R=8.0mm) as well as at Ø3.0mm give you enough information for contact lens fitting.
  • Base curves of contact lenses are stored, categorized and suggested
    manufactures are automatically printed.
Diameter Measurement of Cornea and Pupil
Measurement can be done easily by moving the two cursors on the display to the boundary of Cornea or Pupil.
This is useful for deciding the diameter of a contact lens and for other contact lens fitting practices.